Page 29 - 美国_迪创_Det-Tronics_火焰探测器_X3301_气体检测仪_PIRECL_EQP控制器_产品样本_参数表

FANCYIND
FANCYIND

SPECIFICATIONS FANCYIND

Operating Voltage 24 Vdc. Operating range is 18 to 30 Vdc Certification
Maximum ripple is 2 volts peak-to-peak.
FM ®
Power Consumption 2.5 watts @ 24 Vdc nominal APPROVED
7.6 watts @ 30 Vdc with EOL resistor installed.
Class I, Div. 1, Groups B, C & D (T5); DEMKO 01 ATEX 132195X
Relays Contacts rated 5 amperes at 30 Vdc Class II, Div 1, Groups E, F & G (T5); Increased Safety Model
FANCYIND Fault: FANCYIND Class III. FANCYIND
Class I, Div. 2 , Groups A, B, C & D (T3);
II 2 G
0539
II 2 D
Fire Alarm: — Form C (NO and NC contacts)

Class II, Div 2. Groups F & G (T3);

— normally de-energized
Ex d e IIC T6–T5 Gb
Enclosure NEMA/Type 4X.
— latching/non-latching
Ex tb IIIC T80°C
T6 (Tamb –50°C to +60°C)
— Form A (NO contacts)
For FM Zone approval information, refer to
T5 (Tamb –50°C to +75°C)
the X2200 instruction manual (95-8549).
— normally energized
— latching/non-latching
Auxiliary*: — Form C (NO and NC contacts) IP66/IP67.
Flameproof Model
— normally energized II 2 G
— latching/non-latching. 0539 II 2 D
Ex d IIC T6–T5 Gb
Current Output* 0–20 mA (± 0.3 mA), with a maximum loop IEC 61508 Ex tb IIIC T80°C
(Optional) resistance of 500 ohms from 18–19.9 Vdc, Certified SIL 2 Capable T6 (Tamb –55°C to +60°C)
600 ohms from 20–30 Vdc.
Applies to specific models – T5 (Tamb –55°C to +75°C)
Temperature Range Operating: –40°C to +75°C (–40°F to +167°F) Refer to the SIL 2 Certified IP66/IP67.
Storage: –55°C to +85°C (–67°F to +185°F) X2200 Safety Manual (95-8672).
Hazardous location ratings from –55°C to +75°C
available on flameproof model.
Humidity Range 0 to 95% relative humidity, can withstand 100%
condensing humidity for short periods of time. IECEx Certificate of Conformity
VNIIFTRI IECEx ULD 06.0018X
Certificate of Conformity
The detector has a 90 degree cone of vision
Ex d e IIC T6–T5 Gb

Field of View
FANCYIND Source Tube 3 years. FANCYIND 85 2ExdeIICT6/T5 IP66 FANCYIND
to CUTR 012/2011
Ex tb IIIC T80°C

(horizontal) with the highest sensitivity lying along
T6 (Tamb = –50°C to +60°C).
its central axis.
T5 (Tamb = –50°C to +75°C).
T6 (Tamb = –55°C to +60°C)
Contains radioactive isotope Krypton 85 (Kr )
T5 (Tamb = –55°C to +75°C)
IP66/IP67.

14,800 Becquerels (0.4μCi).
Calculated Activity:
– OR –
– OR –
1ExdIICT6/T5 IP66
Warranty
Ex tb IIIC T80°C
T6 (Tamb = –55°C to +60°C) Ex d IIC T6–T5 Gb
Enclosure Material Copper-free aluminum (painted) or stainless steel T5 (Tamb = –55°C to +75°C). T6 (Tamb = –55°C to +60°C).
(316/CF8M cast). T5 (Tamb = –55°C to +75°C).
IP66/IP67.
Conduit Entry Size 3/4 inch NPT or M25.
2
Wiring 16 AWG or 2.5 mm shielded cable is recommended.
VNIIPO
Shipping Weight Aluminum: 7 lbs. (3.2 kg) Certificate of Conformity to technical
(Approximate) Stainless Steel: 14.6 lbs. (6.7 kg). regulations, GOST R 53325-2009.
UL-BRHZ-0061X
Response Characteristics Ex d e IIC T6–T5 Gb
Very High Sensitivity T6 (Tamb = –50°C to +60°C)
T5 (Tamb = –50°C to +75°C)
Distance Typical Response
Fuel Size Mode VdS IP66/IP67
Feet (m) Time (seconds)
85 (25.9)
1 x 1 foot
n-Heptane 32 inch plume 100 (30.5) 3 2 Low Arc Approvals to EN54-10 – OR –
Ex d IIC T6-T5 Gb
FANCYIND NOTE: Refer to the X2200 instruction manual 95-8549 for details regarding FANCYIND
FANCYIND
Methane
See instruction manual for details.
Low Arc
T6 (Tamb = –55°C to +60°C)
T5 (Tamb = –55°C to +75°C)
detector response.
IP66/IP67.
*Auxiliary relay and 0 to 20 mA output are not available on pulse output model.
Corporate Office
th
Specifications subject to change without notice. 6901 West 110 Street | Minneapolis, MN 55438 USA
Operator: 952.941.5665 or 800.468.3244
All trademarks are the property of their respective owners. Customer Service: 952.946.6491 or 800.765.3473
© 2014 Detector Electronics Corporation. All rights reserved. www.det-tronics.com | Email: det-tronics@det-tronics.com