Page 27 - 美国_迪创_Det-Tronics_火焰探测器_X3301_气体检测仪_PIRECL_EQP控制器_产品样本_参数表

FANCYIND
FANCYIND
SPECIFICATIONS FANCYIND

Operating Voltage 24 Vdc. Operating range is 18 to 30 Vdc. Certification

Power Consumption 2.1 watts @ 24 Vdc minimum. FM FM
16.5 watts @ 30 Vdc with EOL resistor installed and APPROVED APPROVED
heater on maximum.
Class I, Div. 1, Groups B, C & D (T5); Increased Safety Model
FANCYIND
FANCYIND Fire Alarm: — Form C (NO and NC contacts) Class I, Div. 2, Groups A, B, C & D (T3); FANCYIND
0539
II 2 G
Class II, Div. 1, Groups E, F, & G (T5);
FM
®
Contacts rated 5 amperes at 30 Vdc.
APPROVED
Relays
Ex d e IIC T5–T6 Gb

Class II, Div. 2, Groups F & G (T3);
DEMKO 02 ATEX 132195X
Class III.

= –50°C to +60°C).
— normally de-energized

T6 (T
amb
— latching/non-latching.

= –50°C to +75°C).
Enclosure NEMA/Type 4X.
T5 (T
amb
IP66.
— Form A (NO contacts)
Fault:

— normally energized
— latching/non-latching. IECEx Certificate of Conformity Flameproof Model
IECEx ULD 06.0018X APPROVED 0539 ® II 2 G
FM
Auxiliary*: — Form C (NO and NC contacts) Ex d e IIC T5-T6 Gb Ex d IIC T5–T6 Gb
— normally energized T6 (T amb = –50°C to +60°C). DEMKO 02 ATEX 132195X

— latching/non-latching. T5 (T amb = –50°C to +75°C). T6 (T amb = –55°C to +60°C).

IP66. T5 (T amb = –55°C to +75°C).
Current Output* 0–20 mA, with a maximum loop resistance of 500 IP66.
(Optional) ohms from 18–19.9 Vdc, 600 ohms from 20–30 Vdc. – or –
Ex d IIC T5-T6 Gb
Temperature Range Operating: –40°F to +167°F (–40°C to +75°C). T6 (T amb = –55°C to +60°C).
Storage: –67°F to +185°F (–55°C to +85°C). T5 (T amb = –55°C to +75°C).
IP66.
Humidity Range 0 to 95% relative humidity, can withstand 100%
condensing humidity for short periods of time. Dimensions Dimensions shown in inches (centimeters).
Field of View The X9800 has a 90 degree cone of vision with the
FANCYIND Warranty Copper-free aluminum or 316 stainless steel. (11.9) FANCYIND
FANCYIND

highest sensitivity lying along its central axis.
4.7
3 years.
Enclosure Material
4.8
10.2
Conduit Entry Size 3/4 inch NPT or 25 mm. B2223 (25.9) (12.2)
Shipping Weight Aluminum: 6 pounds (2.75 kg).
(Approximate) Stainless Steel: 10 pounds (4.5 kg).
2
2
Wiring 14 AWG (2.08 mm ) or 16 AWG (1.31 mm )
shielded cable is recommended.
Response Characteristics
Very High Sensitivity, TDSA On 9 4-20 mA + 19 4-20 mA – SPARE 29
Distance Typical Response 8 4-20 mA + REF 18 4-20 mA – REF SPARE 28
Fuel Size Quick Fire
Feet (m) Time (seconds) 7 COM FIRE 17 COM FIRE COM AUX 27
n-Heptane 1 x 1 foot 85 (25.9) 15 Off 6 N.O. FIRE 16 N.O. FIRE N.O. AUX 26
Methane 32 inch plume 60 (18.3) 5 Off 5 N.C. FIRE 15 N.C. FIRE N.C. AUX 25
Propane Torch 2 (0.6) 0.04 On 4 COM FAULT 14 COM FAULT RS-485 A 24
NOTE: Refer to the X9800 instruction manual 95-8554 for 3 2 N.O. FAULT 13 N.O. FAULT RS-485 B 23
FANCYIND
FANCYIND *Auxiliary relay and 0 to 20 mA output are not available on pulse output model. Wiring Terminal Identification for Standard X9800
FANCYIND
details regarding detector response.
22
24 VDC +
12
24 VDC +
MAN O i
11
21
1
24 VDC –
24 VDC –
24 VDC –
B2061
Specifications subject to change without notice. Detector Electronics Corporation
Det-Tronics, the DET-TRONICS logo, and Protect•IR are registered trademarks REGISTERED BY UL AND BSI 6901 West 110th Street • Minneapolis, Minnesota 55438 USA
or trademarks of Detector Electronics Corporation in the United States, other ISO 9001
countries, or both. Other company, product, or service names may be trademarks REGISTERED FIRM Operator: (952) 941-5665 or (800) 765-FIRE
REGISTERED FIRM
or service marks of others. NO. A2305 • NO. 25826 Customer Service: (952) 946-6491 • Fax (952) 829-8750
©Copyright Detector Electronics Corporation 2010. All rights reserved. http://www.det-tronics.com • E-mail: det-tronics@det-tronics.com