Page 43 - 美国_迪创_Det-Tronics_火焰探测器_X3301_气体检测仪_PIRECL_EQP控制器_产品样本_参数表

FANCYIND
FANCYIND
speciFicAtions FANCYIND

operating Voltage 24 Vdc nominal. Operating range is 18 to 30 Vdc. temperature range Operating: –55°C to +75°C (–67°F to +167°F)
(Both Modules) Ripple cannot exceed 0.5 volts P-P. Storage: –55°C to +85°C (–67°F to +185°F).
power consumption Humidity 5 to 99% relative humidity; designed for outdoor
applications.
power consumption (Watts) RX Max Fog performance FM 6325 performance req. 4.18

TX Max
FANCYIND @ 24VDC No Heaters or Relays 6.5 2.6 Measurement range B (DNV testing includes operation of alignment
FANCYIND
FANCYIND
Vibration
FM6325 and DNV Standard for Cert No. 2.4, Type
Total Unit,
mounts during 4G vibration).
30% Heater Only
1.4
1.1
50% Heater Only
2.0
2.5
0-5 LFL-meters.
3.5
2.7
70% Heater Only
100% Heater Only
4.2
800 ±50 W/m at ≥ 3° to optical axis and common
2
Relay Only N/A 3.3 interference resistance Immune to sun and flare radiation, tested to
1.2
contaminants.
Total Unit, Max 10.7 7.2
@ 33VDC* Total Unit, Max 16.0 10.0 self-Diagnostic test Fail-Safe operation ensured by performing all
critical tests once per second.
* Per regulatory approval requirements, the unit power consumption was mea-
sured at 33 VDC input voltage (10% above claimed range) and results listed on Module Housing Material 316 stainless steel (CF8M).
the product label.
conduit entry options 3/4 inch NPT or 25mm, with two entries for
transmitter and four entries for receiver.
transmitter Lamp Xenon flashlamp, field-replaceable module. optics protection Microprocessor controlled heated optics mitigate
Warmup time 15 seconds minimum, 150 seconds maximum from against ice and dew formation.
power-up, depending upon alignment accuracy. ingress protection IP66/67; NEMA Type 4X
current output Linear 0-20 mA (isolated/non-isolated) rated at 600 tropicalization / Conformal coated printed circuit boards: CTI
ohms maximum loop resistance @ 24 Vdc operating pcBD protection Rating of 600V, maximum allowed by standard.
voltage. Levels below 4 mA indicate a fault Wiring Third party tested per ASTM-D-3638-07.
condition. Fault output levels are user configurable.
FANCYIND
FANCYIND relay outputs (optional) Available on Ex d approved models only. Two alarm, shipping Weight up to 14 AWG shielded wire, and are DIN/VDE
FANCYIND
Field wiring screw terminals are UL/CSA rated for
2
rated for 2.5 mm wire.
one fault relay. Form C Type (NO/NC).

Contact Rating: 3 amperes at 30 VDC.
Transmitter and receiver with mounting hardware:
85 pounds (38 kg).
Alarm relay setpoint range Low Alarm: 0.5 to 4.5 LFL-meters (default = 1)

High Alarm: 0.5 to 4.5 LFL-meters (default = 3).
5 year limited warranty from date of manufacture.
Warranty
10 year warranty on IR source.
Visual status indicator Multi-color LED on each module indicates operating
status. certification FM & csA
Available Gases Third party performance approved to methane. Detector with Relays:
Det-Tronics verified propane and butane settings Class I, Div. 1, Groups B, C & D (T4).
available. Class I, Div. 2, Groups A, B, C & D (T4).
Tamb = –55°C to +65°C.
Detection range Short Range: 5-60 meters. NEMA Type 4X.
Long Range: 30-120 meters. Detector without Relays:
Misalignment tolerance ±0.8 degree minimum (~±56cm @ 40m; ~±168cm Class I, Div. 1, Groups B, C & D (T4).
@ 120m). Class I, Div. 2, Groups A, B, C & D (T3C).
Tamb = –55°C to +75°C.
calibration LS2000 systems are span calibrated for methane, NEMA Type 4X.
propane, or butane at the factory. Span calibration
in the field is not required. siL Approval
IEC 61508: 2010 Parts 1-7
FANCYIND response time using the on-board magnetic reed switch. ATEX and IECEx certification activities are currently
FANCYIND
FANCYIND

Zero calibration can be accomplished in the field
Certified SIL 2 Capable.
T90: 2 seconds (5.0 LFL-meters applied).
in process.
Accuracy/Linearity
±5% of full scale gas concentration or ±10% of
FM
repeatability applied gas concentration, whichever is greater. APPROVED ®
±5%.
corporate office
Specifications subject to change without notice. 6901 West 110 Street | Minneapolis, MN 55438 USA
th
Operator: 952.941.5665 or 800.468.3244
All trademarks are the property of their respective owners. Customer Service: 952.946.6491 or 800.765.3473
© 2015 Detector Electronics Corporation. All rights reserved. www.det-tronics.com | Email: det-tronics@det-tronics.com